GI coil specification guide: what to put in your enquiry

Galvanised (GI) coil quotes are only comparable when the specification is complete. This guide explains each part of a GI and PPGI specification and what to ask for.

The specification, line by line

1. Standard and grade

State the standard and grade, for example EN 10346 DX51D+Z for general forming. Structural grades such as the S-series are used where strength is specified. If you are replacing an existing supply, quote the grade from your current MTC.

2. Zinc coating mass

Given as a Z-number in grams per square metre, in total across both sides: for example Z100, Z180 or Z275. Choose it for the environment the product will be used in. Coating mass affects price, so quotes with different coatings are not comparable.

3. Dimensions and tolerances

  • Thickness, and whether it is base metal or total coated thickness
  • Width (mill edge or trimmed)
  • Tolerance standard, if you need tighter than normal

4. Coil weight and inner diameter

Your decoiler and handling equipment set the limits. Typical inner diameters are 508 mm or 610 mm. State the maximum coil weight you can handle.

5. Surface finish and treatment

  • Spangle: regular or minimised
  • Surface treatment: chemical passivation, oiling, or both, depending on storage and processing

6. For PPGI: the paint system

  • Colour reference (RAL code)
  • Paint type (for example polyester) and coating thickness, top and back
  • Any requirement for protective film

7. Documents

Ask for a Mill Test Certificate for each heat or batch, and packing lists that match coil numbers. More and more buyers now also ask for embedded-emissions data. See importing steel into the UK in 2027.

A copy-and-paste enquiry template

Product: GI coil · Standard and grade: … · Zinc coating: Z… · Thickness: … mm · Width: … mm · Coil ID: … mm · Max coil weight: … t · Finish: … · Quantity: … t · Delivery: … (postcode or port) · Required by: …

How Legitech helps

Send us the specification and quantity, and we quote the whole requirement with specification, availability, lead time and price confirmed in writing before you commit. We trade in bulk only. See our galvanised steel and steel sections supply.

Frequently asked questions

What does Z275 mean?

It is the zinc coating mass: 275 grams per square metre in total, across both sides of the sheet. Higher coating mass generally means more corrosion protection.

What is the difference between GI and PPGI?

GI is hot-dip galvanised steel. PPGI is galvanised steel with a factory-applied paint system on top, ordered by colour, paint type and paint thickness.

Which standard covers GI coil?

In the UK and Europe, continuously hot-dip coated steel flat products are commonly specified to EN 10346. Grades such as DX51D+Z are widely used for general forming.

What documents should come with GI coil?

A Mill Test Certificate for each heat or batch, packing lists matching coil numbers, and, increasingly, embedded-emissions data for CBAM.

Start a conversation

Send us your GI or PPGI coil specification.

Share the product, the quantity and your timescale. We will come back to you with the next steps, usually within one working day.

Get a quote Chat on WhatsApp