The main types of brick
- Facing bricks: chosen for colour and texture on walls that will be seen.
- Engineering bricks (Class A and B): dense, strong and low in water absorption. Used for damp-proof courses, groundworks, manholes and retaining walls.
- Common bricks: for internal or hidden work where appearance does not matter.
- Concrete blocks: often bought alongside bricks for inner leaves and partitions.
Sizes
The standard UK brick is 215 × 102.5 × 65 mm. With 10 mm joints this gives a coordinating size of 225 × 112.5 × 75 mm. Imperial and special sizes exist for restoration work, so state the size if you are matching existing brickwork.
Estimating quantities
- About 60 bricks per square metre for a single-skin wall in stretcher bond
- About 120 per square metre for a one-brick-thick wall
- Add a wastage allowance for cutting and breakages, often around 5%
Bricks are normally supplied banded on pallets. Pack sizes vary by manufacturer, so we confirm them in the quotation.
What to send for a bulk quote
- Brick type, and the colour or texture reference if facing
- Size and any standard or class required (for example BS EN 771-1, engineering Class B)
- Quantity in bricks or pallets, and any phasing
- Delivery postcode, site access, and any offload requirements
- Required delivery dates
How Legitech helps
We supply bricks, blocks, cement, timber and other building materials in bulk to merchants, contractors and developers. Send us your list and we confirm specification, availability, lead time and delivered price in writing. See wholesale building materials.
Frequently asked questions
What size is a standard UK brick?
The standard UK brick is 215 × 102.5 × 65 mm. With 10 mm mortar joints, that gives a coordinating size of 225 × 112.5 × 75 mm.
How many bricks per square metre?
For a single-skin (half-brick) wall in stretcher bond, the usual rule of thumb is about 60 bricks per square metre. Add a wastage allowance, often around 5%.
What is the difference between facing and engineering bricks?
Facing bricks are chosen for appearance on visible walls. Engineering bricks are dense, strong and have low water absorption, so they are used for damp-proof courses, below ground and load-bearing work.
Which standard covers clay bricks?
Clay masonry units are specified to BS EN 771-1 in the UK.